All posts by geoff

EatASquirrel to introduce new policies regarding content

EatASquirrel’s mission is to promote the squirrel as a food resource that is healthy, organic, sustainable, and free. We started in October of 2020 with our website EatASquirrel.com, and since then have grown to Twitter and YouTube. As our audience has grown, so has the need for clear guidelines regarding our own content.

To that end, we have created an extensive internal policy against which we will check any content intended to be published to our online presence. This policy will also apply retroactively. We have already deleted a number of tweets that violate our policy, and will continue to perform periodic audits on all of our existing content.

In summary, our policies:

  • reaffirm our stance against animal abuse, and our position that the humane dispatch and consumption of squirrels does not constitute animal abuse
  • ensure that no content is published that harasses, threatens, or encourages physical harm against an individual, individuals, or an organization
  • ensure that no content harasses, threatens, or suggests the consumption of squirrels owned or in the care of an individual, individuals, or an organization
  • ensure that we do not promote content not created by us, that violates our own policies
  • ensure that all our content is in compliance with local laws and does not encourage non-compliance with government laws regarding animal hunting, trapping, killing, welfare, safety, or abuse
  • encourage readers to familiarize themselves with their local laws, wherever content promotes actions that may not be legal in all jurisdictions

We strive to be a trusted resource for both new and seasoned squirrelivores, and value your readership.

Why your trap isn’t working

As squirrels are nuisance animals in many parts of the country, there is a large market for squirrel traps. However, some squirrel traps are not as effective as others, and the way you set up a trap will greatly affect its ability to catch your next dinner.

You’re using the wrong trap

Unfortunately, there are certain traps out there that are marketed as “squirrel traps” that are just the wrong design for catching squirrels. A classic design is the rectangular, two door trap with the pressure plate in the middle. In theory, the squirrel tries to eat the bait in the middle, and the pressure of its paw causes the two doors to swing shut.

But this design has many flaws, one of which is exhibited in the video below.

https://youtu.be/87vEEko8hXA?t=55

This trap failed because the squirrel had part of its body outside the trap. Thus, the trap doors could not close.

If you check your traps in the morning and the bait is gone without a squirrel inside, the squirrel either didn’t trip the plate or somehow wrangled its way out of the trap.

Here at EatASquirrel.com, we only recommend one trap, the Squirrelinator. This trap is designed without trip plates, but instead a one-way door mechanism that squirrels cannot defeat.

The trap is not properly secured

Our recommended trap, the Squirrelinator, can be opened from the top in order to load bait into the center of the trap. The top door is latched shut via two spring hooks. It is essential to hook the top door securely to the trap frame. A weak latch can mean the difference between a meal and a runaway squirrel.

The squirrel escaped

Squirrels, being some of the smartest rodents around, can sense whether they’re walking into a trap and become masters at avoiding them. They have been observed stretching their bodies to retrieve the bait and scampering away. Small squirrels such as juveniles have also been known to squeeze through the tiny gaps in cage traps, even after being caught inside.

Is it safe to eat a roadkilled squirrel?

It’s a sad fact of nature in the urban jungle that many squirrels are killed by vehicles while trying to cross the road. But here at EatASquirrel.com, you might be wondering if you can have it for dinner. The short answer is, probably not.

Squirrel, like any other meat, will go bad if not refrigerated properly. When a squirrel or any animal is roadkilled, bacteria within the animal quickly start multiplying. These bacteria produce toxins which are harmful to eat, and cannot be neutralized by cooking under high temperatures.

Additionally, you might not be the first animal to see pavement pizza as a nutritious dinner. Birds, cats, and flies will often show up first on the scene of freshly deceased squirrel. If these animals are carrying diseases, you do not want those diseases passed on to you. Even if there’s not a scavenger in sight, you can’t know if the crows have chewed on its insides or if the flies have taken a piss on the carcass.

So the next time you see a dead squirrel that has been sitting on the side of the road, skip it and let nature take its course. There are much safer ways of getting squirrel to your dinner table straight from your backyard.

Why are squirrels considered pests?

To the general public, squirrels are considered more of a “harmless” inhabitant of many urban landscapes. But the truth of squirrels is much more sinister when you do some research.

Squirrels have been known to cause many problems in urban areas, most of which arise from animal-human conflict. To name a few:

Fortunately, squirrels are easy to control and with the right equipment, you can have a delicious meal while you’re at it!

The many benefits of eating squirrels

It’s delicious

Squirrels are widely known in the hunting community as one of the most delicious small game animals. Their meat is not too tough and not too gamey. They are easy to skin and can serve as a valuable learning tool for children who want to learn hunting and survival skills.

It’s easy to cook

The easiest recipe simply involves seasoning the squirrel and grilling it over the barbecue. This is the quickest way to enjoy a fresh kill.

This website is dedicated to lots and lots of delicious recipes; see them here!

It’s nutritious

Pound for pound, squirrel meat packs more protein than beef or chicken.

It’s free

If you live in an urban area, chances are there are squirrels all around you. With prices of supermarket meat rising, squirrel meat is an economical alternative as long as you know how to do it and as long as it’s within your local laws.

It’s organic

Squirrels by their very nature are an organic food source. Compare them to the meat that you buy at the supermarket:

Squirrel meatSupermarket meat
Born wildBorn in captivity
Raised wildRaised in captivity
Roam wildNo space to roam
Eat wildFed in captivity, a diet ranging from garbage to decent
Dispatched humanelyQuestionable methods of killing
Few widespread problems with tainted meatMany meat recalls historically

There’s no question that squirrel meat is a more ethical, humane source of meat than what you buy at the supermarket.

It’s sustainable

https://www.theguardian.com/food/shortcuts/2019/feb/04/view-to-a-cull-is-grey-squirrel-the-ultimate-sustainable-meat

It’s a learning experience

Since squirrel meat can’t be often bought in a grocery store, you are responsible for dispatching, skinning, and field-dressing a squirrel for the table. This process will teach you a great deal about a squirrel’s biology, behaviors, and physiological systems.

How to preserve a squirrel paw

What you need:

  • Squirrel paws (duh)
  • Dish soap
  • Towel
  • Hair dryer
  • Container, no lid
  • Plain salt

Directions:

  1. Rinse each paw under warm water and rub in dish soap to clean the fur of any blood, dirt, or grime.
  2. Dry each paw with a towel as much as possible
  3. (Optional) Blow-dry with a hair dryer to speed up the drying process
  4. Fill the bottom of the container with a thin even layer of salt
  5. Gently place the paws in the container, in a single layer.
  6. Cover completely with salt
  7. If you have a batch of squirrel paws to preserve, repeat steps 5 and 6, layering the paws and salt.
  8. Keep container in a dry place, out of reach of pets or children.
  9. Check the container once per day. If you notice salt clumping up, that is because it is absorbing moisture. If there are too many salt clumps then you may have to refresh the salt by emptying the container and repeating steps 4-7.
  10. After a week, check the container to ensure that paws have completely dried out.

The wonders of denatured alcohol

Denatured alcohol, or methylated spirits, is a wonderful compound that has a wide variety of uses including fuel for camping stoves and as a paint stripper in a pinch. But it also serves many uses in the world of squirreling.

As an astringent

Submerging any part of a squirrel’s skin, including the tail, in denatured alcohol will cause the follicles to contract, locking in the squirrel fur.

As a cleanser

Can be used to kill bacteria, fleas, and ticks from squirrel pelt.

As a preservative

You can submerge squirrel pelts, tails, and limbs for a long time and remove them from the liquid for later preservation.

See How to preserve a squirrel tail.

How to preserve a squirrel tail

Bone-in

You will need:

  • A container long enough to hold your straightened squirrel tail
  • A squirrel tail
  • Lots of salt

Cut the tail from the squirrel.

Remove any excess meat attached to the tip of the tailbone.

Prepare a container to dry out the tail by covering the bottom of the container in salt.

Place the tail in the salt.

Pour salt to completely cover the tail.

Place in a dry, warm location for a week, or when tail has completely dried out.

Bones can be sold to Mepps for 16-26 cents each: https://www.mepps.com/squirrel-tail/.

Bone removed

You will need:

  • 1 squirrel tail
  • Sharp knife
  • Pliers

Begin by using just your fingers to expose as much of the tailbone as possible.

Peel back a section of the skin of the tail. Using your knife, gently scrape between the skin and bone to coerce the skin off the tailbone. Rotate the tail and repeat until enough bone is exposed to grip with pliers (about 1-2 inches).

Firmly grip the exposed bone in the pliers in your dominant hand. Using your non-dominant hand, grip the base of the exposed tail and pull apart firmly with steady pressure. The tailbone should slip right off.

Discard the tailbone and soak the tail in a solution of 50% water, 50% denatured alcohol for at least 48 hours. This will tighten up the hair follicles on the tailbone ensuring that the hairs cannot be easily pulled out.

Remove from the alcohol solution and rinse thoroughly with running water. Apply shampoo and conditioner as you would your own hair. Towel dry, then blow dry as much as possible.

Lay the tail flat on a dry towel, and the tail should be fully dried and preserved within a week

Note that this process is similar to that of preserving a fox tail:

Squirrel products

Besides squirrel meat, you can use all parts of a squirrel to your own liking. Here is some inspiration

Skulls

Squirrel skulls are a popular way to preserve part of the animal. As squirrel heads are not generally eaten, they often go to waste but this doesn’t have to be the case.

See the article How to make a squirrel skull.

Tails

For fishing, squirrel tails provide the best hair, according to Mepps. In fact, Mepps will buy your tails for a few cents apiece.

See the article How to preserve squirrel tails.

Skeletons

Full skeletons often sell for hundreds of dollars and are very laborious and time consuming to extract, assemble, and articulate.

Taxidermy

Taxidermy is an art that requires considerable skill and should not be performed by a beginner amateur. However, the results can be quite stunning and lifelike.

Pelt

Squirrel pelt can be used to make pouches, wallets, and other small trinkets.

How to tan a squirrel pelt.

Paws/feet

The paws and feet of a squirrel, which are usually cut from the body before skinning, can be dried in salt or borax and made into earrings, necklaces, or other decorative items.

How to make a squirrel skull

Most squirrel hunters do not eat the head of the squirrel, but that doesn’t mean it needs to go to waste. Making a skull is a very simple process that will teach you about squirrel biology and is fun for the kids too!

If you haven’t done so already, dispatch the squirrel and remove its head from its body with a sharp knife.

Supplies

  1. 1 or more squirrel heads, removed from body. Skin does not need to be removed prior.
  2. Container or pot large enough to fit all heads.
  3. Water
  4. Stove or sous vide machine
  5. Small screwdriver
  6. Kitchen gloves (optional)
  7. Hydrogen peroxide

Directions

The process of making skulls consists of four major steps: boiling, cleaning, reassembly, and bleaching.

Boiling

If you have a sous vide machine:

  • Vacuum pack the squirrel heads into bags. If you don’t have vacuum bags, place the heads in a Ziploc bag and remove as much air as possible.
  • Fill the container with water
  • Set sous vide to the following settings: 160F (71C), 16-24hr
  • Completely submerge the bag of heads in the water
  • After the sous vide timer is up, remove the squirrel heads

Without a sous vide machine, boiling can be done over a stovetop:

  • Fill pot with water, heat to a boil
  • Place the heads into the pot, ensuring that all heads are completely submerged
  • Turn down the heat so the water simmers right at boiling temperature
  • Leave the head(s) in the boiling water for a minimum of 20 minutes, no more than 45 minutes. For especially small heads, I recommend no more than 30 minutes. If you boil a head for too long, the skull may split along its joints.
  • Using a pair of tongs, take the heads out of the pot and rinse thoroughly in cold water

Cleaning

If the squirrel heads are still hot, we recommend a pair of kitchen gloves for the initial steps.

  • Peel off the outer skin with your thumbs, rinsing under cold water as necessary.
  • Carefully peel the muscle away from the bone. If boiled properly, the muscle should easily separate. If this is not the case, return the head to a boil for a few more hours.
    • The nose cartilage may come off of the skull at this point. This is normal. Save it for later if you wish to reassemble the skull.
  • Dislocate the bottom jaw from the top jaw. The bottom jaw itself may come apart into two symmetrical pieces. Remove any meat from the bottom jaw and set aside
  • Insert the screwdriver into the brain cavity through the back of the head, and swish around under cold water to break apart the brain. Do not use heavy force. Shake the skull to dislodge parts of the brain from the cavity.
  • Insert the screwdriver through the nose, and carve away any remaining soft tissue. Do not use heavy force.
  • Any remaining soft tissue can be removed by hand, or with the screwdriver.

Reassembling your skull

The skull will come apart in the cleaning process so you may wish to reassemble it.

Materials:

  • Skull pieces (upper head, lower jaw halves, nose cartilage pieces)
  • Toothpick
  • Styrofoam board, can be bought from an arts&crafts store such as Michaels or JoAnn
  • Superglue or adhesive

Start by gluing the two jaw halves together:

  • Dampen one half of the jaw (doesn’t matter which one)
  • Affix the jaw half to the styrofoam board by its base
  • Place one drop of super glue on the inside of the other half of the jaw where the incisor tooth meets the bone.
  • Affix the jaw half to the styrofoam board, while maintaining the correct position for both halves of the jaw
  • Check for the correct fit by placing the skull on top of the jaw. The molars should line up, and the upper incisors should overlap just in front of the lower incisors. Adjust the lower jaw halves as necessary.
  • Let sit for 24 hours or as long as indicated by your superglue instructions
  • Lift the jaw from the styrofoam

If either part of the squirrel’s orbit is missing, it can usually be pieced back together simply by reinserting the dislocated orbit piece into its original location. In some cases you will need super glue to affix the bones together.

You will need to reassemble the nose cartilage, usually this can be done simply by reinserting each half of the nose firmly into its original slot. Some super glue may be needed if too much bone material has fallen out.

Bleaching

Bleaching whitens the squirrel skull, and this step can be skipped if you wish to retain the skull’s natural color. You will need:

  1. Hydrogen peroxide
  2. Skulls, cleaned
  3. A container to submerge the skulls
  4. Tongs

Place the skulls in the container and pour hydrogen peroxide in the container, covering all skulls. Wait 24 hours. Use tongs to remove and wash hands immediately after removal.